19 Ocak 2015 Pazartesi

Hantek DSO1102S 100 MHz İzole Kanallı El Tipi Dijital Osiloskop

OneDrive Download
  • Isolated level: 1000V CATII, 600V CATIII.
  • High Bandwidth 60MHz-200MHz Oscilloscope, 1GSa/s sample rate, 6000 Counts DMM with analog bargraph and data recorder.
  • 1M Memory Depth.
  • High Refresh Rate (2500 frames).
  • Large 5.6 inch TFT Color Display,  High Resolution(640*480), Dual-Window Design --More clear, More detailed.
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
  • Easy-to-use pop-up menu with built-in multi-language help system.
  • 32 Automatic Measurements.
  • Waveform Math: Add, Subtract, Multiply, and Divide.
  • Store and recall over.
  • Automatic cursor tracking measurements.
  • XY Mode.
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
  • Pass-Fail function compares a stored waveform to an unknown input.
  • Average Mode for smoothing waveforms.
  • Square Wave Output (2V, 1kHz) for probe adjustment.
  • USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option, easy to control by PC or long-distance.
  •  Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
  • Model DSO1202S DSO1152S DSO1122S DSO1062S
    Bandwidth 200MHz 150MHz 120MHz 60MHz
    Channel 2
    Real-Sample Rate 1GSa/s
    Equivalent Sample Rate 25GSa/s
    Record Length 1M
    Rish time ≤1.7ns/≤2.3ns/≤2.9ns/≤5.8ns
    Timebase Accuracy ±50ppm
    Time Base Range 2ns/div-2000s/div
    Video Help --
    SD Card --
    Input Impandance  1MΩ
    VOLTS/DIV Range 2mV/div~5V/div
    A/D Converter 8bit 
    Position Range ±50V(5V/div), ±40V(2V/div~500mV/div),
    ±2V(200mV/div~50mV/div), ±400mV(20mV/div~2mV/div).
    DC Gain Accuracy ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
    ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div.
    Bandwidth Limit 20MHz
    Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
    Trigger Source CH1, CH2
    Math +,-,x,÷,FFT, Invert
    Cursor Measurement Voltage difference between cursors: △V;
    Time difference between cursors: △T;
    Reciprocal of △T in Hertz (1/ΔT);
    Auto Measuerment Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
    The float voltage between BNC and Ground  600V CATIII, 1000V CAT II
    The float voltage between each Channel 600V CATIII, 1000V CAT II
    The float voltage between Multimeter and Ground 1000V 
    between input Ports directly 400V CAT II 
    Input by 10:1 probe 600V CATIII, 1000V CAT II
    DMM Max. Resolution 6,000 Counts
    Testing Modes Voltage, Current, Resistance, Capacitance, Diode & Continuity
    Max. Input Voltage AC: 600V, DC: 800V
    Max. Input Current AC:10A , DC: 10A
    Max. Input Impandance 10MΩ 
    Display 5.6" TFT 16K Color Display, 640*480 dots
    Size 245mm x 163mm x 52mm
    Weight 1.3KG(Without Package)
    Standard Probe PP200x2 PP200x2 PP200x2 PP80x2
    DMM Mode
    Max. Resolution 6000 Counts
    DMM Testing Modes Voltage, Current, Resistance, Capacitance, Diode & Continuity
    Max. Input Voltage AC:600V, DC: 800V
    Max. Input Current AC: 10A, DC:10A
    Input Impedance 10MΩ
    DMM TrendPlot 1.2M  Point
    Range Resolution Accuracy Resolution
    DC Voltage 60.00mV ±1%±3 digit 10uV
    600.0mV 100uV
    6.000V 1mV
    60.00V 10mV
    600.0V 100mV
    800V 1V
    AC Voltage 60.00mV ±1%±3 digit 10uV
    600.0mV 100uV
    6.000V 1mV
    60.00V 10mV
    600.0V 100mV
    DC Current 60.00mA ±1%±5 digit 10uA
    600.0mA ±1.5%±5 digit 100uA
    6.000A 1mA
    10.00A 10mA
    AC Current 60.00mA ±1%±5 digit 10uA
    600.0mA ±1.5%±5 digit 100uA
    6.000A 1mA
    10.00A 10mA
    Resistance 600Ω ±1%±3 digit 0.1Ω
    6.000KΩ
    60.00KΩ 10Ω
    600.0KΩ 1KΩ
    6.000MΩ 10KΩ
    60.00MΩ ±1%±5 digit 100KΩ
    Capacitance 40.00nF ±2%±5 digit 10pF
    400.0nF 100pF
    4.000uF 1nF
    40.00uF 10nF
    400.0uF 100nF
    Attention: the smallest capacitance value that can be measured in 5nF
    Diode 0V~2.0V
    ON-OFF test <10Ω



     
    NumberAttachments TitleOperating
    1DSO1000S SoftwareDownload
    2DSO1000S DriverDownload
    3DSO1062S FirmwareDownload
    4DSO1122S FirmwareDownload
    5DSO1152S FirmwareDownload
    6DSO1202S FirmwareDownload
    7DSO1000S ManualDownload
    8DSO1000S SDK(Beta)Download
     
Function Picture
 
If connect to computer, it can be used as a virtual oscilloscope
 
   
   
   
   
   
   
   
 This device is running Linux 2.6, for more detail see

Hantek DSO1202S 200 MHz İzole Kanallı El Tipi Dijital Osiloskop

OneDrive Download
  • Isolated level: 1000V CATII, 600V CATIII.
  • High Bandwidth 60MHz-200MHz Oscilloscope, 1GSa/s sample rate, 6000 Counts DMM with analog bargraph and data recorder.
  • 1M Memory Depth.
  • High Refresh Rate (2500 frames).
  • Large 5.6 inch TFT Color Display,  High Resolution(640*480), Dual-Window Design --More clear, More detailed.
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
  • Easy-to-use pop-up menu with built-in multi-language help system.
  • 32 Automatic Measurements.
  • Waveform Math: Add, Subtract, Multiply, and Divide.
  • Store and recall over.
  • Automatic cursor tracking measurements.
  • XY Mode.
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
  • Pass-Fail function compares a stored waveform to an unknown input.
  • Average Mode for smoothing waveforms.
  • Square Wave Output (2V, 1kHz) for probe adjustment.
  • USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option, easy to control by PC or long-distance.
  •  Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
  • Model DSO1202S DSO1152S DSO1122S DSO1062S
    Bandwidth 200MHz 150MHz 120MHz 60MHz
    Channel 2
    Real-Sample Rate 1GSa/s
    Equivalent Sample Rate 25GSa/s
    Record Length 1M
    Rish time ≤1.7ns/≤2.3ns/≤2.9ns/≤5.8ns
    Timebase Accuracy ±50ppm
    Time Base Range 2ns/div-2000s/div
    Video Help --
    SD Card --
    Input Impandance  1MΩ
    VOLTS/DIV Range 2mV/div~5V/div
    A/D Converter 8bit 
    Position Range ±50V(5V/div), ±40V(2V/div~500mV/div),
    ±2V(200mV/div~50mV/div), ±400mV(20mV/div~2mV/div).
    DC Gain Accuracy ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
    ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div.
    Bandwidth Limit 20MHz
    Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
    Trigger Source CH1, CH2
    Math +,-,x,÷,FFT, Invert
    Cursor Measurement Voltage difference between cursors: △V;
    Time difference between cursors: △T;
    Reciprocal of △T in Hertz (1/ΔT);
    Auto Measuerment Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
    The float voltage between BNC and Ground  600V CATIII, 1000V CAT II
    The float voltage between each Channel 600V CATIII, 1000V CAT II
    The float voltage between Multimeter and Ground 1000V 
    between input Ports directly 400V CAT II 
    Input by 10:1 probe 600V CATIII, 1000V CAT II
    DMM Max. Resolution 6,000 Counts
    Testing Modes Voltage, Current, Resistance, Capacitance, Diode & Continuity
    Max. Input Voltage AC: 600V, DC: 800V
    Max. Input Current AC:10A , DC: 10A
    Max. Input Impandance 10MΩ 
    Display 5.6" TFT 16K Color Display, 640*480 dots
    Size 245mm x 163mm x 52mm
    Weight 1.3KG(Without Package)
    Standard Probe PP200x2 PP200x2 PP200x2 PP80x2
    DMM Mode
    Max. Resolution 6000 Counts
    DMM Testing Modes Voltage, Current, Resistance, Capacitance, Diode & Continuity
    Max. Input Voltage AC:600V, DC: 800V
    Max. Input Current AC: 10A, DC:10A
    Input Impedance 10MΩ
    DMM TrendPlot 1.2M  Point
    Range Resolution Accuracy Resolution
    DC Voltage 60.00mV ±1%±3 digit 10uV
    600.0mV 100uV
    6.000V 1mV
    60.00V 10mV
    600.0V 100mV
    800V 1V
    AC Voltage 60.00mV ±1%±3 digit 10uV
    600.0mV 100uV
    6.000V 1mV
    60.00V 10mV
    600.0V 100mV
    DC Current 60.00mA ±1%±5 digit 10uA
    600.0mA ±1.5%±5 digit 100uA
    6.000A 1mA
    10.00A 10mA
    AC Current 60.00mA ±1%±5 digit 10uA
    600.0mA ±1.5%±5 digit 100uA
    6.000A 1mA
    10.00A 10mA
    Resistance 600Ω ±1%±3 digit 0.1Ω
    6.000KΩ
    60.00KΩ 10Ω
    600.0KΩ 1KΩ
    6.000MΩ 10KΩ
    60.00MΩ ±1%±5 digit 100KΩ
    Capacitance 40.00nF ±2%±5 digit 10pF
    400.0nF 100pF
    4.000uF 1nF
    40.00uF 10nF
    400.0uF 100nF
    Attention: the smallest capacitance value that can be measured in 5nF
    Diode 0V~2.0V
    ON-OFF test <10Ω



     
    NumberAttachments TitleOperating
    1DSO1000S SoftwareDownload
    2DSO1000S DriverDownload
    3DSO1062S FirmwareDownload
    4DSO1122S FirmwareDownload
    5DSO1152S FirmwareDownload
    6DSO1202S FirmwareDownload
    7DSO1000S ManualDownload
    8DSO1000S SDK(Beta)Download
     
Function Picture
 
If connect to computer, it can be used as a virtual oscilloscope
 
   
   
   
   
   
   
   
 This device is running Linux 2.6, for more detail see